Casio DT-X10 Series User Manual page 32

4. Turn on power. This causes the Satellite Cradle power indicator lamp to light red.
5. Making sure that their two IR ports come into contact with each other, place the
Handheld Terminal onto the Satellite Cradle. This causes the Satellite Cradle power
indicator lamp to light green.
• If the system is operating normally and data communication is enabled, the system
status indicator lamp lights green.
• The communication indicator lamp flashes green when data communication starts.
Important !
• A high-sensitivity communication element is used during IR data
communication.
In order to ensure successful communication, avoid using portable phones or
other devices that emit radio wave in the area where you are performing IR data
communication.
If you need to use such a device, move away from the communicating Handheld
Terminals. In case of a portable phone, keep it at least 30cm (
• Take care to avoid allowing the Satellite Cradle power contacts to become
connected to each other, which creates a short.
Shorting the power contacts can damage the Satellite Cradle.
⁄ ⁄ ⁄ ⁄ ⁄
7 7 7 7 7
) away.
11 "
8 8 8 8 8
E-37