Leds; Chassis Led; Port Status Leds - Cisco 8800 Series Hardware Installation Manual

LEDs

You can perform the following check on LEDs that assist you with the troubleshooting process:
•
•
•
•
•
•
•

Chassis LED

The LEDs indicate whether each type of module (Route Processor, line cards, fabric cards, fan trays, and
power supplies) is fully functional or have a fault condition.
Table 13: Chassis LED Descriptions
LED
ATTN
(Attention)

Port Status LEDs

Note
The 8800-LC-48H does not have port LEDs.
Each port on the 8800-LC-36FH has an LED. The following table describes port status LEDs.
Chassis LED, on page 87
Port Status LEDs, on page 87
Power Supply LEDs, on page 88
Fan Tray LEDs, on page 89
Route Processor Card LEDs, on page 91
Fabric Card LEDs, on page 93
Line Card LEDs, on page 94
Color
Blue
Off
C H A P T E R
Status
The operator has activated this LED to identify this chassis.
The chassis is not functional.
Hardware Installation Guide for Cisco 8800 Series Routers
6
87