Cisco 8800 Series Hardware Installation Manual page 56

Attach Front Door to Chassis
Figure 38: Attach Front Door to 8812 Chassis
Figure 39: Attach Front Door to 8808 Chassis
Step 4 Now align the spring pin to hole in the top hood and release the spring pin.
Step 5
Ensure the pins are properly inserted into the holes so that the door can freely swing on the spring pins.
Step 6 Repeat Steps 2–5 to install the other front door.
Step 7
Ground the front door.
For information on grounding the front door, see
Hardware Installation Guide for Cisco 8800 Series Routers
50
Ground the Front Door, on page
Unpack and Install the Chassis
51.