Cisco 8800 Series Hardware Installation Manual page 49

Unpack and Install the Chassis
Figure 30: Bottom Cover for 8808 Chassis
Step 6 Secure the bottom cover to the cable management brackets by using four M4 x 6 mm pan-head Phillips screws.
Tighten each screw to 11.5 to 15 in-lb (1.3 to 1.7 N·m) of torque.
Step 7
Before you install the top hood, remove the connector cap from the alarm cable.
Figure 31: Remove Connector Cap
Install Cable Management on a Chassis
Hardware Installation Guide for Cisco 8800 Series Routers
43