Table of Contents
Advertisement
Figure 54 Network address translation settings (IPoA)
In this page, Network Address Translation (NAT) allows you to share one Wide
Area Network (WAN) IP address for multiple computers on your Local Area
Network (LAN).
If you do not want to enable NAT, and wish the user of modem to access the
Internet normally, you need to add a route on the uplink equipment. Otherwise, the
access to the Internet fails. Normally, please enable the NAT function.
Step7
After finishing setting, click Next to display the following page.
Step8
In this page, select a preferred WAN interface as the system default
gateway and then click Next to display the following page.
NETGEAR JDGN1000 User Manual
Figure 55 Routing-default gateway (IPoA)
43
Advertisement
Table of Contents
