Set Password - NETGEAR JDGN1000 User Manual

This page allows you to backup, restore and erase the router's current settings.
Backup: Specify the path to back up the current configuration in a
configuration file on your computer. You can rename the configuration file.
Restore: Click Browse, locate and select the previously saved backup file,
then Click Restore to restore settings from a backup file.
Erase: Click Erase to erase the current settings and reset the router to the
original factory default settings.
Caution:
Do not try to go online, turn off the router, shutdown the computer or do
anything else to the router until the router finishes restarting! When the
Test light stops blinking, wait a few more seconds before doing anything
with the router.

5.5.4 Set Password

Choose Maintenance > Set Password, and the following page appears.
NETGEAR JDGN1000 User Manual
Figure 81 Backup Settings
60