Maintenance - NETGEAR JDGN1000 User Manual

In this page, you can create a filter rule to identify the outgoing IP traffic by
specifying a new filter name and at least one condition.
Filter Name: Set the filter name.
IP Version: Select the proper IP version in the drop-down list.
Protocol: Select a protocol that needs to be filtered.
Source IP address [/prefix length]: Set the range of local IP address.
Source Port (port or port: port): Set the local port.
Destination IP address [/prefix length]: Set the range of IP address of the
exterior network.
Destination Port (port or port: port): Set the port of the exterior network.
After finishing setting, click Apply/Save to save and activate the filtering rule.

5.5 Maintenance

Choose Maintenance and the submenus of Maintenance are shown as below:
NETGEAR JDGN1000 User Manual
Figure 76 Adding an IP outgoing filtering rule
57