Click the Add button to display the following page.
In this page, enter the traffic name, select the rule order and the rule status, and
specify the classification criteria and the classification results.
After finishing setting, click Apply/Save to save and apply the settings.
5.6.7 Dynamic DNS
Choose Advanced > Dynamic DNS and the following page appears.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC
regulation, all WiFi product marketed in US must fixed to US operation channels only.
NETGEAR JDGN1000 User Manual
Figure 106 Adding a QoS classification rule
75
.