Step9
In this page, it displays the information about the PPPoA settngs.Click
Apply/Save to apply the settings, and then the following page appears.
You can modify the settings by clicking the Back if necessary.
Figure 48 Completing the settings of PPPoA WAN service
Adding an IPoA WAN service
This section describes the steps for adding the IPoA WAN service.
Step1
Choose Setup >Adsl Settings to dsipaly the DSL ATM Interface
Configuration page. In this page, you need to add a PVC for IPoA mode.
Click the Add button in the DSL ATM Interface Configuration page to
display the following page.
NETGEAR JDGN1000 User Manual
Figure 47 PPPoA summary
39