Disarming The System; Bypassing Protection Zones - Honeywell Lyric LCP300-L User Reference Manual

Disarming the System

Security > Disarm
NOTE: Disarming the system also silences audible alarms and trouble alerts.
Your wireless key (key fob) is similar to your keys or access card. If lost or stolen,
another person can compromise your security system. Immediately notify your
Dealer/Installer of a lost or stolen wireless key. The Dealer/Installer will then
remove the wireless key programming from the security system.
To disarm your security system:
• The system beeps and announces "Disarmed", followed by alerts about system readiness,
if any. The announcement
• "Check system" indicates a faulted sensor or problems in the Gateway itself.
In most situations, if a valid user code is not entered within 30 seconds of pressing Disarm, the
Home screen reappears, and the system remains armed.
NOTES: • If a valid code is not entered by the time the entry delay ends, an alarm occurs.
• The Guest code and the Installer code can only disarm the system if that code was
used to arm the system. If the Quick Arm option has been used, neither the Guest
Code nor Installer Code can disarm the system.
User Code Error: When the screen displays User Code Error, it means too many invalid user
codes have been entered. The system will not accept additional user code entries
for 15 minutes (lockout period).

Bypassing Protection Zones

Bypass allows arming the system while intentionally leaving selected zones unprotected.
Bypassed zones will not trigger an alarm.
NOTES: • Fire and Carbon Monoxide (CO) and Emergency zones cannot be bypassed.
• Bypassed zones are automatically un-bypassed when the system is disarmed.
To Bypass zones:
1. Before arming the system, press Zones on the Security menu. A list of your system's
zones appears. Faulted (open) zones are shown in
Use the up and down arrows to scroll through the list of zones.
2. Select the zone(s) to be bypassed.
3. Press Bypass at the bottom of the screen. A keypad appears.
At the bottom of the screen, you can Bypass All Faulted, which selects all zones with
faults or other issues.
Press Select All to toggle through options for selecting zones.
4. Enter a user code. The zone list reappears with the Bypass icon shown for the affected
zones.
5. Arm the system as usual.
Press Clear Bypass to un-bypass any previously bypassed zones. Any zones with faults must be
addressed before arming the system.
IMPORTANT SECURITY NOTICE
17
red or orange.