Page 1
LCBS Connect Gateway LGW1000 INSTALLATION INSTRUCTIONS APPLICATION The Honeywell LCBS Connect Gateway serves as the communication device between a building site and the Honeywell Cloud, providing contractors with a way to remotely monitor, control, and configure Honeywell building controllers from Honeywell’s LCBS website.
Page 2
LCBS controllers are assigned a proper name using Honeywell Cloud. This can only occur if a the configuration UI before connecting the gateway. building has been created and is ready for a This will ensure the gateway is able to send proper gateway’s registration ID to be entered.
Page 3
Ethernet: One (1) Ethernet interface supporting 10 Base- not work behind a transparent proxy, especially if it T and 100 Base-TX requires authentication. Network: LONworks™ Refer to “Honeywell LCBS IT White Paper” for further APPROVAL BODIES details. CUL, US listed E87741 UL916 energy management equipment subassembly...
Page 4
Gateway has been registered and is sending data to Honeywell Cloud Gateway has been registered but is unable to send data to the Honeywell Cloud; Internet is working Gateway has been registered but is unable to send data to the Honeywell Cloud;...