Honeywell Lyric LCP300-L User Reference Manual page 55

384 RF Low Battery
401 Open/Close by User
403 Open/Close Automatic
406 Cancel
407 Remote Arm/Disarm
408 Quick Arm
441 Armed Home
455 Auto-Arm Failed
459 Recent Close
461 Wrong Code Entry
570 Zone/Sensor Bypass
601 Manual Trigger Test Report
602 Periodic Test Report
Listen-in to follow
606
607 Walk Test
623 Event 90% Full
627 Program Mode Entry
628 Program Mode Exit
654 System Inactivity
655 Reset Master Code
*If APL is enabled, AlarmNet 360
after a delayed alarm is delivered. This message is meant to alert the Central Station that the system has been tampered with and may
have been compromised.
Central Station Messages
The following messages are sent by the
listed below.
Alarm Condition
Power On / Reset
Primary Communication Path Supervision
Secondary Communication Path Supervision
Contact ID ® Event Log Codes
TM
will generate a special comm. fail message (E316) if it does not hear from a unit within 15 minutes
controller
Test
RF Low Battery
Arm Away/Disarmed
Automatic O/C (or Scheduled Arming)
Cancel
Remote Arm/Disarm
Quick arm
Arm Home/Disarmed
Auto-arm Failed
Recent Closing
Wrong Code Entry
Zone Bypass
Manual Trigger Test Report
Periodic test report
Listen-in to follow
Walk Test Mode
Event Log 90% Full
Program mode entry
Program mode exit
System Inactivity
User Code
internal cellular or WiFi devices for the conditions
Alarm Code
E33900950
E350C0951
E350C0952
555555559
55
Restore Code
R350C0951
R350C0952