Advanced; Network - D-Link SECURICAM DCS-2100 User Manual

DCS-2100 User's Manual

Advanced

The Advanced tab provides the following configuration options: Network, DDNS & UPnP,
Video, Image Setting, and Motion Detection.

Network

Reset IP Address
at next boot:
IP address:
Subnet mask:
Default router:
Primary DNS:
Secondary DNS:
SMTP (mail)
server 1:
SMTP account
SMTP password1:
Recipient email
address 1:
SMTP (mail)
server 2:
D-Link Systems, Inc.
Once the DCS-2100 is configured, this box should be
unchecked at all times. If the box has been checked and the
connection is lost, run the Installation Wizard to find the
camera's IP address.
Necessary for network identification.
Used to determine if the destination is in the same subnet. The
default value is "255.255.255.0."
The router used to forward frames to destinations in a different
subnet. Invalid router settings may cause the failure of
transmissions to a different subnet.
Primary domain name server that translates names to IP
addresses.
Secondary domain name server to backup the primary one.
The domain name or IP address of external mail server.
The user name used to log into your e-mail account (e.g. jdoe
name 1: or jdoe@yourisp.com depending on your ISP).
The password used to log into your e-mail account. (The
password will appear as dots instead of entered characters.)
The e-mail address of recipients for snapshots or a system log
file. Multiple recipients must be separated by a semicolon ";"
The domain name or IP address of a secondary mail server
used only if the primary mail server is unreachable.
Using the DCS-2100 with an Internet Browser
47