Hardware Installation - D-Link SECURICAM DCS-2100 User Manual

DCS-2100 User's Manual

Hardware Installation

Connect to a Network
If you are connecting the DCS-2100 to an Ethernet network, connect an Ethernet cable
to the network cable connector located on the Internet Camera's bottom panel and
attach it to the network.
Attach the external power supply
Attach the external power supply to the DC power input connector located on the Internet
Camera's bottom panel (labeled 5VDC) and connect it to your wall outlet. When you
have a proper connection, the LED will light up.
D-Link Systems, Inc.
Hardware Installation
11