D-Link SECURICAM DCS-2100 User Manual page 120

DCS-2100 User's Manual
In this window, follow the steps below to schedule video recording with motion detection
in the Primary Schedule:
1 Check if you want the recording schedule to occur Once or Every day.
2 Set the date, time-line, and begin and end times for recording.
3 Check Event Mode.
4 Select the motion detection window that will be used to trigger motion detection.
Note: You must first create motion detection windows in the Web configuration
page of the camera. Remember the names of the windows and the order in which
you created them, as they are not displayed inside the scheduler. Instead, they
are listed in the order they were added. For example, the first window created is
labeled "Window1."
5 Click on "Disable" under the Secondary Schedule.
Click the Save button when finished. You have now set a schedule to record video
when motion detection is triggered. If you would like to save this configuration, click
Save As to save this configuration to a folder in your hard drive. This configuration can
be used on another system running IP surveillance or can be used as a backup if you
need to re-install the IP surveillance software program.
D-Link Systems, Inc.
Schedule Video Recording with Motion Detection
120