DCS-2100 User's Manual
Hardware Overview
Connections
DC Power Connector
The DC power input connector is
labeled DC 5V with a single jack
socket to supply power to the
DCS-2100.
Reset Button
Reset will be initiated when the
reset button is pressed once and
Power LED begins to flash.
Factory Reset will be initiated
when the reset button is pressed
continuously for ten seconds or
when the Power LED begins to
light up. Release the reset button
and the Power LED will begin to
flash
indicating
DCS-2100's
reverting back to the factory
settings.
D-Link Systems, Inc.
that
the
settings
are
Ethernet Cable Connector
The DCS-2100 features an RJ-45 connector for
connections to 10Base-T Ethernet cabling or
100Base-TX Fast Ethernet cabling (which
should be Category 5 UTP cable). The port
supports the NWay protocol, allowing the
DCS-2100 to automatically detect or negotiate
the transmission speed of the network.
Hardware Overview
9