D-Link SECURICAM DCS-2100 User Manual page 52

DCS-2100 User's Manual
Power line
frequency (for
fluorescent light):
Maximum Frame
Video quality
White Balance:
D-Link Systems, Inc.
Select the option for color or monochrome video display.
Color:
Size:
Three options exist for the sizes of the video display. You can
select between 160x120, 320x240, or 640x480. In 640x480
mode, the frame rate will be reduced to 10fps and increased to
30fps automatically when it is switched back to a lower image
size.
Fluorescent lights may intermittently cause a flashing image
depending on the AC power line frequency. Change the
frequency setting to eliminate a flashing image when the light
source is fluorescent light.
Limits the maximum refresh frame rate. The frame rate is used
with the Video quality control setting (below) to optimize
Rate:
bandwidth utilization and video quality.
To fix the bandwidth utilization regardless of the video quality,
control:
choose Fix bit rate and select the desired bandwidth. The video
quality may be reduced in order to send maximum frames with
limited bandwidth, especially when images change drastically.
For higher video detail regardless of the bandwidth selection,
select Fix quality and select a video quality level. This setting
will utilize more bandwidth to send the maximum frames when
images change drastically.
Flip:
Vertically rotate the video.
Mirror:
Horizontally rotate the video. Check both flip and mirror if the
DCS-2100 is to be installed upside down.
Choose the suitable option for the best color temperature.
Using the DCS-2100 with an Internet Browser
52