D-Link SECURICAM DCS-2100 User Manual page 49

DCS-2100 User's Manual
2nd FTP server:
2nd FTP user
password:
2nd FTP remote
Secondary FTP
passive mode:
HTTP Port:
Control channel
Audio channel
Video channel
Improve audio
quality in low
bandwidth
environment:
Invalid settings may cause the DCS-2100 to not respond. Change the configuration
settings only if necessary. Consult with your network administrator or your Internet Service
Provider (ISP) if you do not have the necessary information. If you cannot connect to
the camera, refer to page 126 for camera reset and restore factory settings procedures.
D-Link Systems, Inc.
The domain name or IP address of the external FTP server.
Note that the 2nd FTP server will only be used if the 1st FTP
server is unavailable. If the image upload to the 1st FTP server
is successful, no attempts will be made to connect to the 2nd
FTP server.
name:
Granted user name on the backup FTP server.
2nd FTP
Granted password on the backup FTP server.
Granted folder on the backup FTP server.
folder:
Passive mode setting for the backup FTP server.
Can be set to other than the default port 80. When the
administrator changes the HTTP port of the DCS-2100 (which
has an IP address of 192.168.0.100) from 80 to 8080, users
must type http://192.168.0.100:8080 in the Web browser bar.
Can be set to other than the default port 5001 to correspond
port:
with the port opened by the firewall.
Can be set to other than the default port 5002 to correspond
port:
with the port opened by the firewall.
Can be set to other than the default port 5003 to correspond
port:
with the port opened by the firewall.
In a low bandwidth network environment you can check this
option to improve audio quality by sacrificing some real-time
synchronization.
Mute: Click to disable the microphone on the camera.
Using the DCS-2100 with an Internet Browser
49