Package Contents; Hardware Installation; Quick Installation Guide - D-Link DCS-2102 Quick Installation Manual

Quick Installation Guide

DCS-2102
DCS-2121

Package Contents

If any of the items are missing, please contact your retailer.
DCS-2102 CD-ROM
with
or 2121
manual
Internet
and
camera
software

Hardware Installation

Connect the Wireless Antenna (DCS-2121 only)
Screw the Wireless antenna onto the Internet camera's antenna connector.
Connect the Ethernet Cable
Connect the Ethernet cable to the Internet camera's Ethernet port
and attach the other end of the cable to the network.
Note: This step is necessary to configure DCS-2121.
Attach the Power Adapter
Attach the power adapter to the Internet camera's power socket and
connect it to a power outlet.
The camera's LED will light red when it receives power.
The LED will light green after the camera connects to the network.
The LED will flash green while accessing the camera.
Please refer to the Manual on the CD to install the software utility
and finish installation.
Megapixel Internet Camera
Megapixel Wireless Internet Camera
Category 5
Ethernet cable
2
Power Camera
adapter stand
Wireless
antenna
(DCS-212
1 only)