NETGEAR Nighthawk R7000P User Manual page 48

Network Settings
The router comes ready for WiFi, Ethernet, and USB connections. You can customize the router's network
settings. We recommend that you install the router and connect it to the Internet before you change its network
settings.
This chapter includes the following sections:
• View or Change WAN Settings
• Set Up a Default DMZ Server
• Change the Router's Device Name
• Change the LAN TCP/IP Settings
• Specify the IP Addresses That the Router Assigns
• Disable the DHCP Server Feature in the Router
• Manage Reserved LAN IP Addresses
• Use the WPS Wizard for WiFi Connections
• Specify Basic WiFi Settings
• Change the WiFi Mbps Settings
• Change the WiFi Password or Security Level
• Set Up a Guest WiFi Network
• Control the WiFi Radios
• Set Up a WiFi Schedule
• Specify WPS Settings
• Manage Implicit Beamforming
• Manage Airtime Fairness
• Manage MU-MIMO
• Enable Router Mode
• Use the Router as a WiFi Access Point
• Set Up the Router in Bridge Mode
• Set Up a Bridge for a Port Group or VLAN Tag Group
• Custom Static Routes
on page 49
on page 50
on page 50
on page 51
on page 54
on page 56
on page 56
on page 58
on page 59
on page 60
on page 61
on page 61
on page 62
on page 63
on page 63
on page 64
on page 64
on page 65
on page 70
on page 52
on page 53
on page 58
on page 66
48
5