Set Up An Ipv6 Fixed Internet Connection - NETGEAR Nighthawk R7000P User Manual

The IPv6 page displays.
5. From the Internet Connection Type menu, select Pass Through.
The page adjusts, but no additional fields display.
6. Click the Apply button.
Your settings are saved.

Set Up an IPv6 Fixed Internet Connection

To set up a fixed IPv6 Internet connection:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. From the Internet Connection Type menu, select Fixed.
The page sdjusts.
6. Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix Length. The IPv6 address and prefix length of the router WAN interface.
• Default IPv6 Gateway. The IPv6 address of the default IPv6 gateway for the router's WAN interface.
• Primary DNS Server. The primary DNS server that resolves IPv6 domain name records for the
router.
• Secondary DNS Server. The secondary DNS server that resolves IPv6 domain name records for
the router.
Note If you do not specify the DNS servers, the router uses the DNS servers that are
configured for the IPv4 Internet connection on the Internet Setup page. (See
Set Up the Internet Connection
7. Select an IP Address Assignment radio button:
• Use DHCP Server. This method passes more information to LAN devices but some IPv6 systems
might not support the DHCPv6 client function.
• Auto Config. This is the default setting.
Nighthawk AC2300 Smart WiFi Router
on page 23.)
Specify Your Internet Settings
32
Manually