NETGEAR Nighthawk R7000P User Manual page 15

• Enable blinking on Internet LED, LAN LED, Wireless LED and USB LED when data traffic is
detected. Allows standard LED behavior. This feature is selected by default.
• Disable blinking on Internet LED, LAN LED, Wireless LED and USB LED when data traffic is
detected. Blinking is disabled when data traffic is detected.
• Turn off all LEDs except Power LED. All the LEDs, except the Power LED, are turned off.
6. Click the Apply button.
Your settings are saved.
Nighthawk AC2300 Smart WiFi Router
Hardware Setup
15