Use Vpn To Access Your Internet Service At Home; Set Up Vpn Client Internet Access In The Router - NETGEAR Nighthawk R7000P User Manual

Ac2300 smart wifi router
Hide thumbs Also See for Nighthawk R7000P:
Table of Contents

Advertisement

3.
To access the USB device, click the ReadySHARE icon.
4.
To access media on the router's network, click the remote router icon.

Use VPN to Access Your Internet Service at Home

When you're away from home and you access the Internet, you usually use a local Internet service provider.
For example, at a coffee shop you might be given a code that lets you use the coffee shop's Internet service
account to surf the web.
Nighthawk lets you use a VPN connection to access your own Internet service when you're away from home.
You might want to do this if you travel to a geographic location that doesn't support all the Internet services
that you use at home. For example, your Netflix account might work at home but not in a different country.

Set Up VPN Client Internet Access in the Router

By default, the router is set up to allow VPN connections only to your home network, but you can change
the settings to allow Internet access. Accessing the Internet remotely through a VPN might be slower than
accessing the Internet directly.
To allow VPN clients to use your home Internet service:
1.
Launch a web browser from a computer or mobile device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > VPN Service.
The VPN page displays.
5.
Select the Enable VPN Service radio button.
6.
Scroll down to the Clients will use this VPN connection to access section, and select the All sites on
the Internet & Home Network radio button.
When you access the Internet with the VPN connection, instead of using a local Internet service, you
use the Internet service from your home network.
7.
Click the Apply button.
Your settings are saved.
8.
Click the For Windows or For non-Windows button and download the configuration files for your VPN
clients.
9.
Unzip the configuration files and copy them to the folder where the VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at
files\OpenVPN\config\
Nighthawk AC2300 Smart WiFi Router
by default.
Use VPN to Access Your Network
134
C:\Program

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents