Alarm & Event Setting - Honeywell HUSS-E4V User Manual

HUSS-E4V Network Client
The value of Multicast IP Port must be bigger than 1024.
Click OK to apply the new settings; click Cancel to give up the changes and return to the
main window; click Default , the default setting is displayed on the screen; then click OK
or Apply to restore default settings
Alarm & Event Setting
Alarm & Event Setting includes Motion Detection, Video Loss, Alarm Input and Alarm
Output settings. User can check the relevant information and modify relevant information
here.
Motion Detection
In the main screen (Figure 4-6), navigate to ConfigurationAlarm&Event
SettingMotion Detection and the following window is displayed:
62