Table of Contents
Advertisement
HUSS-E4V Network Client
Figure 4-43 Alarm Output
According to the output number, check the related boxes to set the trigger mode,
"Automatic", "Manual On" or "Manual Off".
The "Status" field is not editable. It shows the current status of the alarm output ports
automatically.
Delay when Triggered (s) – To maintain the alarm status for a few seconds after the
alarm input trigger is complete, specify the time period in the corresponding field (10-80
seconds).
Click OK to apply the new settings; click Cancel to give up the changes and return to the
main window; click Default , the default setting is displayed on the screen; then click OK
or Apply to restore default settings.
68
Advertisement
Table of Contents
