Casio SI-460 User Manual page 31

ADDITIONAL INFORMATION
DISPLAYS
DISPLAYED MESSAGE
VOICEMAIL
was pressed when
ON/OFF
the greeting timer or voice
mail timer is on.
Answering system timer has
been programmed on.
You are in the greeting select
mode, and a greeting has not
been recorded for your
selection.
The incorrect data was entered
during time and date setup.
Station has initiated an
intercom call.
Your station ID or a non-
existing station was entered.
The LOWER button on the
autodial bank has been
pressed.
Station is recording a memo.
32 messages have been
received or recording time is
full (around 30 minutes).
Caller ID record received, but
included unrecognizable data.
Nothing stored in this autodial
location.
(cont.)
STATUS ACTION
Turn the greeting timer/voice
mail timer off.
Turn the answering system
timer off. See page 24.
Record a greeting.
Re-enter the correct time and
date. See page 14 under
"SETTING THE TIME AND
DATE."
See pages 51-52.
Enter the correct station ID.
See "INTERCOM & PAGING
OPERATION" on page 51.
When " " appears on the
display press an autodial
station to access lower
autodial stations. See
"PROGRAMMING AUTODIAL"
on pages 26-28.
Press to end.
RECORD
MEMO/CONV
Erase some messages to allow
other message to be recorded.
See page 50 to erase
messages.
Select another autodial
location or store an autodial
number. See page 27, under
"PROGRAMMING AUTODIAL."
60
ADDITIONAL INFORMATION
DISPLAYS
DISPLAYED MESSAGE
Sending a page.
Message playback has been
paused.
Line 1 has been disconnected
and then reconnected, a
station has been added to the
system, the AC power has
been removed and then
reconnected, a power failure
occurred or a unit changed it's
station ID.
Line 1 has been disconnected.
Selection made in the greeting
mode select.
Station has released privacy.
The auto attendant station has
attempted to select another
caller ID option other than
"ANSWER."
The scratch pad button has
been pressed.
Line 1 has been disconnected,
AC power was lost or this is
initial setup.
(cont.)
STATUS ACTION
See page 53 to send a page.
Press or
PLAY ALL
to resume message playback.
See "PAUSE MESSAGE
PLAYBACK" on page 49.
Perform a system update at
another station. See page 58
under "PERFORMING A
SYSTEM UPDATE."
Reconnect line 1. If display
still appears after the line is
reconnected, make sure line 1
is not in use when line 1 is
reconnected.
A greeting has not been
recorded for your selection.
Please record a greeting. See
page 24 under "SETTING THE
GREETING MODE: ANSWER
OR ANNOUNCE ONLY."
Privacy has been released on
this call.
Auto attendant station is
automatically programmed to
save all answered calls caller
ID records.
Enter the number you want to
store and then press
again. See page 41.
Press the soft key under
" ." See page 14 under
"ASSIGNING A STATION ID
NUMBER."
61
PLAY NEW
SCRATCH PAD