Programming Autodial; Autodial Card; Programming A Caller Id Record Into Autodial; Entering Autodial Records - Casio SI-460 User Manual

PROGRAMMING AUTODIAL

Each SI-460 in the system can store up to 20 autodial numbers. Ten 16-digit numbers can be
accessed with the autodial key and ten additional entries using the lower register key followed by
the autodial key. Each autodial entry can have up to 16 digits and can have 14 characters for the
name. Once a number has been stored in an autodial location, press the selected autodial
location key to have the SI-460 automatically dial the programmed number.

AUTODIAL CARD

Remove the autodial card. Write down the names and/or telephone
numbers associated with the stored speed dial numbers and replace
the autodial card and plastic cover. An extra autodial card is
provided for your convenience.
Autodial numbers can be programmed in two ways:
PROGRAMMING A CALLER ID RECORD
INTO AUTODIAL
To enter a caller ID record from your directory into an autodial location:
1.
Press .
CALLER ID
2.
Press the < or > soft keys to scroll through
records.
3.
When the caller ID record you want to
store into autodial appears in the display,
press and hold the selected autodial key
location.
4.
After you hear a beep:
Home
Car
Bank
Joe Client
Direct Line
Agency
Sue Smith
LOWER
5.
The telephone number of the caller ID
record will appear in the display. Press
" " to accept the number. (To edit the
number, see page 28 "EDITING AUTODIAL
ENTRIES.")
NOTE:
Include the outside line digit if one is needed to dial.
6.
The caller ID name will now appear in the
display. Press the soft key under "
to store the name and number. (To edit the
name, see page 28 "EDITING AUTODIAL
ENTRIES.")
7.
Press to exit.
CALLER ID
26
PROGRAMMING AUTODIAL

ENTERING AUTODIAL RECORDS

To manually enter a name and number into autodial,
1.
Press PROGRAM .
2.
3.
4.
5.
Press the soft key under "
an autodial location (01-20).
6.
7.
If a number has not already been
programmed, " " will appear in
the display. Use the keypad to enter the
autodial number, up to 16 digits. If the
number is entered incorrectly, press the
soft key under " " to move the cursor left
and the soft key under " " to remove
digits. Use the keypad to
re-enter the correct digits.
NOTE:
Include the outside line digit if one is needed to dial
out of the system.
8.
"
9.
Use the keypad to enter the name, up to
14 characters. Pressing a key once will
display the first letter on that key. Pressing
it repeatedly will cycle through all the
characters on the key.
NOTE:
Pressing the 1 key will add a space.
10.
When the desired letter appears in the
" to select
display, press the soft key under "
to move the cursor to the right.
11.
Repeat steps 8 and 9 until the name is
entered.
12.
13.
Repeat steps 4 through 11 to program
the remaining autodial numbers.
14.
Press PROGRAM to exit.
27
"