Table of Contents
Advertisement
PROGRAMMING AUTODIAL
ENTERING AUTODIAL RECORDS
To manually enter a name and number into autodial,
1.
Press
PROGRAM
.
2.
3.
4.
5.
Press the soft key under "
" to select
an autodial location (01-20).
6.
7.
If a number has not already been
programmed, "
" will appear in
the display. Use the keypad to enter the
autodial number, up to 16 digits.
,
and
can be entered as well. If
FLASH
the number is entered incorrectly, press
the soft key under " " to move the cursor
left and the soft key under "
" to
remove digits. Use the keypad to
re-enter the correct digits.
NOTE:
Include the outside line digit if one is needed to dial
out of the system.
8.
9.
Use the keypad to enter the name, up to
14 characters. Pressing a key once will
display the first letter on that key.
Pressing it repeatedly will cycle through
all the characters on the key.
NOTE:
Pressing the 1 key will add a space.
10.
When the desired letter appears in the
display, press the soft key under
"
" to move the cursor to the
right.
11.
Repeat steps 8 and 9 until the name is
entered.
12.
,
13.
Repeat steps 4 through 11 to program
the remaining autodial numbers.
14.
Press
PROGRAM
to exit.
18
PROGRAMMING AUTODIAL
EDITING AUTODIAL ENTRIES
To edit a name or number in autodial,
1.
Follow steps 1-4 under "ENTERING
AUTODIAL RECORDs" on page 18.
2.
3.
The programmed autodial number will
appear in the display. To alter the autodial
number, press the soft key under " " to
move the cursor left and the soft key
under "
" to remove digit. Repeat as
necessary.
4.
Use the keypad to re-enter the correct
digits.
5.
6.
Press in combination, the soft key under
" " to move the cursor left and the soft
key under "
" to remove characters.
AUTODIAL PAUSE
When programming numbers in autodial, a two-second pause can be inserted to use with
telephone banking, long distance or PBX services.
When a pause needs to be included in an autodial entry,
1.
Press
.
HOLD
PAUSE
A " " will appear on the display to indicate a two-second pause has been added.
7.
Use the keypad to enter the correct letter,
up to 14 characters. Pressing a key once
displays the first letter on that key.
Pressing it repeatedly will cycle through all
the characters on the key. When the
desired letter appears in the display, press
the soft key under "
" to move the
cursor to the right.
8.
Repeat step 7 until the name is entered.
9.
The next autodial station will appear in the
display.
10.
Repeat steps 2 through 9 to edit the
remaining autodial numbers.
11.
Press
PROGRAM
to exit.
19
Advertisement
Table of Contents
