Table of Contents
Advertisement
TELEPHONE OPERATION
MEMORY STORAGE
AUTO BUSY REDIAL
Auto busy redial automatically redials a busy line up to 10 times, at 10 second intervals. If the
line is still busy after 4 minutes, the SA-400 will return to the idle mode. Automatic busy redial
can be canceled anytime by pressing
REDIAL
AUTO REDIAL
Once you get a busy signal:
1.
Hang up.
2.
REDIAL
Press
twice. The unit will attempt to redial the number for 15 seconds and the
AUTO REDIAL
SPEAKERPHONE INDICATOR will flash rapidly.
3.
The SPEAKERPHONE INDICATOR will then flash slowly for 10 seconds before attempting to
redial the number.
4.
The unit will redial the busy line up to 10 times or until the call is answered.
5.
Press
to end the auto redial and begin speaking.
6.
Return the handset to the cradle or press
NO ANSWER REDIAL
No answer redial automatically redials an unanswered line up to 10 times, at 30 second intervals.
If no one answers the line after 4 minutes, the SA-400 will return to the idle mode. Automatic no
answer redial can be canceled anytime by pressing
Once you make a call where no one answers:
1.
Hang up.
2.
REDIAL
Press
twice. The unit will attempt to redial the number for 15 seconds and the
AUTO REDIAL
SPEAKERPHONE INDICATOR will flash rapidly.
3.
The SPEAKERPHONE INDICATOR will then flash slowly for 10 seconds before attempting to
redial the number.
4.
The unit will redial the unanswered line up to 10 times or until the call is answered.
5.
Press
to end the auto redial and begin speaking.
6.
Return the handset to the cradle or press
REVIEWING AUTODIAL ENTRIES
To review stored autodial entries,
1
. Press an AUTODIAL STATION key.
2.
The name and/or number programmed in the chosen autodial location will appear on the
display. The screen will return to the default screen after thirty seconds.
(cont.)
again.
to end the call.
again.
REDIAL
AUTO REDIAL
to end the call.
30
TELEPHONE OPERATION
MEMORY STORAGE
DIALING STORED AUTODIAL OR AUTO INTERCOM NUMBERS
1.
Pick up the handset.
2.
Press the AUTODIAL STATION key or AUTO INTERCOM key of the number you want to speed
dial.
3.
The SA-400 will automatically dial the number displayed.
4.
To hang up, return the handset to the cradle.
STORING A SCRATCH PAD NUMBER
While on-hook or off-hook, the scratch pad is a location where you can temporarily store a
number. The number you enter into the scratch pad will remain there until another number is
entered.
To store a number in scratch pad memory.
1.
Press
. "
" will appear in the display.
SCRATCH PAD
2.
Enter the number you want to temporarily store in this location, using the keypad.
3.
Press
again. The unit will beep to indicate the number entered has been saved and
SCRATCH PAD
the LCD will return to the standby display.
DIALING A SCRATCH PAD NUMBER
To dial a number stored in the scratch pad memory,
1.
Lift the handset.
2.
Press
.
SCRATCH PAD
3.
Press
.
DIAL
4.
The number will automatically be dialed.
DISPLAY AND DIAL NUMBER
To display a number prior to dialing the number,
1.
Use the keypad to dial a number.
2.
The telephone number will appear in the display as it is entered.
3.
Lift the handset.
4.
Press
to dial the displayed number.
DIAL
(cont.)
31
Advertisement
Table of Contents
