Operation - Makita ML003G Instruction Manual

Turning on the light and brightness mode selection
(Fig. 4)
1. Switch: Press the switch once, the light turns on (At the
same brightness mode as the last setting). Press the
switchagain,thelightturnsoff.
2. B rightnessmodeselection:Brightnesssequenceis:
High mode / Low mode / High mode for each press when
the light is on.
5
Fig.4
►5. Switch 6. Brightness mode selection
Battery protection system (Fig. 5)
Theapplianceisequippedwithabatteryprotection
systemtoextendbatterylife.Whenthebatterybecomes
low, the LED lights go out except one LED as illustrated.
Thenapproximatelyfivetotenminuteslater,thesystem
automaticallycutsoffpower.
Fig.5

OPERATION

CAUTION:
• Alwaysputtheapplianceonflatandstableplace.
Otherwiseafallingaccidentmayoccur.
Adjusting the angle of the light (Fig. 6)
Loosentheknobsonthebothside.Adjusttheangleofthe
light(adjustmentrangeis240°).Thentightentheknobs
again.
CAUTION:
Takecarenottotrapfinger(s)whenadjustingtheangleof
the light.
6
Fig.6
►7. Knob
Using with tripod (optional accessories)
CAUTION:
• Readcarefullytheinstructionmanualsoftheaccessories
before using them with the light.
You can put the light on the tripod to facilitate the operation.
(Fig. 7)
CAUTION:
• Be careful not to drop the appliance when attaching the
appliance on the tripod.
• Place the tripod on a level and stable surface to prevent
from falling.
• Spread the legs of the tripod to the maximum.
• Do not use the tripod if the wind is strong.
• Makesurethattheapplianceisattachedsecurelyonthe
tripod.
• Removetheappliancewhencarryingthetripodorwhen
folding the legs of the tripod.
• Becarefulnottogetyourhandcaughtinthelegsofthe
tripod when closing the tripod.
Fig.7
6 English
7
240°