Operation - Makita DML805 Instruction Manual

Use with AC power:
Connect the plug to a power supply.
Turning on LED light
Press the switch once, the light shines brightly (high
mode). Press the switch again, the light shines mildly
again.
Battery protection system
The luminaire is equipped with a battery protection
system to extend battery life.
When the battery becomes low, the LED lights go out
except one LED (the one on the second line center).
1. Plug
1
1. Switch
1

OPERATION

CAUTION:
•
Otherwise a falling accident may occur.
Adjusting the angle of the worklight
Loosen the knobs on the both side. Adjust the angle of
the worklight. Then tighten the knobs again.
Using with tripod or vise (optional accessories)
CAUTION:
• Read carefully the
accessories before using them with the luminarie.
• When using with tripod or vise, do not let the total
height exceed 1.75 m.
You can put the luminarie on the tripod or vise to facilitate
the operation.
1. Knob
1
instruction manuals of the
5