4
5
Cropping the image to a 4:3 aspect ratio in an HD system
In an HD system, to crop an image having a screen aspect ratio of 4:3 to an
aspect ratio of 4:3, use the following procedure.
1
2
Notes
When the screen aspect ratio of 16:9 is selected for all M/E banks in the System
>Format >Active Line/Aspect menu, the setting of 4:3 Crop is disabled.
156
Signal Output Settings (Output Menu)
When you selected [Box1] or [Box2] in step 3, adjust the following
parameters.
Knob
Parameter
Adjustment
2
Box Size
Box size
3
Luminance
Display brightness
a) Adjustable for Box2
When in step 3 you selected [Grid], in the <Grid Size> group, select one
of the following.
80.00%: Set the grid size to 80% of the screen frame
85.00%: Set the grid size to 85% of the screen frame
90.00%: Set the grid size to 90% of the screen frame
100.00%: Set the grid size to the full-screen size (100% of the screen
frame)
When in step 3 you selected [Box1] or [Box2], in the <Box1 Adjust> or
<Box2 Adjust> group, select the screen aspect ratio (16:9/14:9/4:3).
When in step 3 you selected [Grid], in the <Grid Adjust> group, select the
screen aspect ratio (16:9/4:3).
In the Switcher >Output menu, press [4:3 Crop].
The 4:3 Crop menu appears.
The status area shows the output ports and respective 4:3 Crop mode
settings.
Press [4:3 Crop], turning it on.
This enables the crop setting, and this is reflected in the status area.
Setting values
50.00 to 100.00
a)
0.00 to 100.00