Settings For Switcher Configuration (Config Menu) - Sony MVS-8000 User Manual

Settings for Switcher Configuration (Config
Menu)
To make settings for the switcher processor configuration, use the Switcher
>Config menu.
To display the Config menu
In the Engineering Setup menu, select VF3 'Switcher' and HF1 'Config.'
The status area shows the output signal assignment for each of the M/E and
PGM/PST banks.
The following functions are available here.
• System Phase: Adjust the switcher internal reference phase.
• Switching Timing: Specify the timing of video switching.
• M/E Config: Set the configuration for the M/E and PGM/PST outputs.
– Standard mode: Fix the output configuration for the maximum of four
– Multi-program mode: Increase the number of M/E or PGM/PST
– DSK mode: Treat P/P as four DSKs, with no background transitions.
• User 1 to 8 Config: Assign the User regions, being color backgrounds 1 and
2, AUX1 to 48, monitor 1 to 8, frame memory 1 to 8, and color correctors 1
and 2, to any of User1 to User8.
• Logical M/E Assign: Make settings for handling PGM/PST hardware
logically as an M/E.
134

Settings for Switcher Configuration (Config Menu)

outputs (Out1 to 4) as follows.
Out1: Program output
Out2: Preview output
Out3: Clean output
Out4: Key preview output
The program output is: clean output + key 1 + key 2 + key 3 + key 4
For the key preview output, you can select either video mode (background
and key) or key mode (key only), and select the background and key (K-
PVW Config).
programs, and assign any of the following to the maximum of six outputs
(Out1 to 6). (M/E Output Assign)
Program outputs 1 to 4, preview output, key preview outputs 1 and 2,
clean output.
Further, you can select the program background from Clean or Utility2,
and change the combination of signals from which the program output is
configured. (PGM Config)
From among backgrounds 1 to 4, select one for which to make settings for
program output configuration. (PGM Config) The signals which can be
selected as the background are limited to Out1 to 6 from M/E-1.