Setting The Reference Output - Sony MVS-8000 User Manual

M/E-1 Output 1 to 6
M/E-2 Output 1 to 6
M/E-3 Output 1 to 6
PGM/PST 1 to 6
DME Monitor Video
DME Monitor Key
Color Corrector 1 and 2
Undefined
Color Bkgd 2
Frame Memory 1 to 8
a) M/E output signals selected in the M/E Output Assign menu.
[Aux Bus]: It is not possible to make duplicate assignments.
Preset
Edit Preview
AUX 1 to 48
3
Using any of the following methods, select the output port number and
signal to be assigned.
• Press directly on the list in the status area to make the selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob
1
2
• For output ports not to be assigned, press [Inhibit].
The selected signal appears in reverse video.
4
Press [Set] to confirm the assignment.

Setting the Reference Output

Notes
This function is not supported on the MVS-8000G.
To adjust the reference output phase with respect to the reference input, adjust
the following parameters in the Switcher >Output menu.
Knob
2
a)
a)
a)
a)
Parameter Adjustment
Output No Output port number
Source No Selection of signal to be assigned 1 and upwards
Parameter Adjustment
Line Line phase
Setting values
1 to 48
Setting values
–90 to +90
Signal Output Settings (Output Menu)
153