AEG AS-BSL1-4000 Series Installation Manual page 5

Low voltage energy storage unit battery pack
Table of Contents

Advertisement

product itself. Double-check the order information and
the product nameplate to ensure the products are of
the ordered type. Check that the package contents are
not damaged and that all items listed are present (see
4.5 „Unboxing and package content"). Should you find
any issues, contact the shipping company and / or your
supplier as soon as possible before attempting product
installation.
Take note of the indications displayed on the product
packaging. Specifically:
Icon
Meaning
This side up
Fragile
Handle with care
Do not turn or drop
Do not stack
Keep dry
Packaging icon meaning
Please make sure that the storage system and its
components are properly packed and sealed to
ensure safe transportation and that the IP20 protection
degree is maintained. Ensure that the energy storage
system is stored in a dry, clean place and not exposed
to water or dust.
The energy storage unit and the battery pack are
heavy. Handle them carefully in order to avoid
injuries. At least two people are required to move and
install the energy storage system.
To ensure handling, installation and maintenance
safety, and to avoid personal injuries, please adopt
mechanical protective measures such as wearing
protective shoes and work clothes.
To avoid electric shock, remove metallic
rings, watchbands, ear, nose or lip rings or other
metallic devices during installation, connection and
maintenance of the energy storage system.
AEG LOW VOLTAGE ENERGY STORAGE UNIT (4 kWH) INSTALLATION MANUAL
2.2.1 Handling the battery pack
Handle the battery pack carefully as it may leak
+ _
corrosive electrolyte.
To avoid the risk of explosion of the battery pack,
make sure to observe the following:
Do not make the battery pack undergo strong impacts.
Do not crush or puncture the battery pack.
Do not dispose of the battery pack in a fire.
To avoid fire risks to the battery pack, please make
sure to observe the following:
Do not expose the battery pack to temperatures that
exceed 60°C.
Do not place the battery pack near a heat source, such
as a fireplace.
Do not expose the battery pack to direct sunlight.
Do not allow the battery connectors to touch
conductive objects such as wires.
To avoid the risk of the electric shock from the
battery pack, please make sure to observe the following
handling instructions:
Do not disassemble the battery pack.
Do not touch the battery pack with wet hands.
Do not expose the battery pack to moisture or liquids.
Keep the battery pack away from children and animals.
To avoid damaging the battery pack, please make sure
to also observe the following handling instructions:
Do not allow the battery pack to come in contact with
liquids.
Do not expose the battery pack to high pressures.
Do not place any objects on top of the battery pack.
Do not pull or drag the battery pack, nor step on it.
2.3 Installation safety
Installing solar photovoltaic systems and energy
storage devices requires specialized skills and
knowledge and can only be performed by qualified
technicians (see 2. 1 General safety). All electric
installations need to comply with the national and local
laws and standards.
For installation, choose a location out of the reach
of children or public access. Keep the energy
storage system and the battery pack away from the
reach of children.
5
EN
PD202107 V1-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

As-bbl1-4000

Table of Contents