Table of Contents
Advertisement
5.3.5 Accessing the statistics in the Data menu
5.3.6 Checking Fault messages
5.4 Advanced settings (for installers only)
5.4. 1 Setting of battery parameters
5.4.2 Setting of grid parameters
Charging and Discharging settings of the AEG energy
storage system
5.4.3 Additional settings
6. TROUBLESHOOTING
6. 1 Battery pack warnings and troubleshooting
6.2 Energy storage system warnings and
troubleshooting
6.2. 1 Fault codes
6.2.2 Troubleshooting specific faults
7. GENERATOR AND AC COUPLING FUNCTION
8. PRODUCT END OF LIFE
9. DISCLAIMER OF LIABILITY
10. CONTACT
1. PRELIMINARY REMARKS
1.1 Icons
This section describes relevant warning symbols
recurring in the installation and operation manual of
AEG energy storage systems. Icons highlight relevant
information for the physical and property safety of
the user. Compliance to the provided instructions
is essential to prevent physical injury and product
damage. Below is a list of the icons used in this manual:
Icon
Meaning
Instruction
Danger
Serious physical injury or
even death may occur in case
of noncompliance with the
requirement (electrical hazard)
Warning
Physical injury or product
damage may occur in case of
noncompliance with the
requirement.
Electro-
Damage may occur in case of
static
noncompliance with the
discharge
requirement.
Hot
Product surface may become
surface
hot, do not touch
Note
Useful information for product
i
maintenance and operation is
provided
Table 1: Icon meaning
AEG LOW VOLTAGE ENERGY STORAGE UNIT (4 kWH) INSTALLATION MANUAL
1.2 Product Identification
24
24
Energy Storage System:
25
Each energy storage system can be identified by means
25
of the following information:
25
Serial Number
26
Each storage unit is identified by a unique serial
26
number univocally coupled with a barcode, to be found
26
on the cabinet.
26
Product Label
26
The product label of the energy storage unit is placed
26
on the housing. It provides information about the main
28
parameters of the storage unit such as: Product Name
29
Code (PNC), Capacity, PV Input, AC Grid Port Input and
29
Output, Off-Grid AC Output, Battery Data, and further
29
operation parameters.
30
HOME ENERGY STORAGE SYSTEM
MODEL (PNC): AS-BSL1-4000
CAPACITY
Nominal storage capacity (kWh)
Usable storage capacity (kWh)
PV INPUT
Max. recommended DC power (W)
Max. DC voltage (V)
MPPT voltage range (V)
Max. input current (A)
Max. short current (A)
Number of MPPT trackers
AC GRID PORT INPUT AND OUTPUT
Grid type
AC voltage (V
Max. continuous power (W)
Max. AC apparent power (VA)
Max. AC output current (A)
Max. AC intput current (A)
Grid frequency/range (Hz)
Power factor range
OFF-GRID AC OUTPUT
Grid type
AC voltage (V
Max. continuous power (W)
Max. AC apparent power (VA)
Max. AC output current (A)
Grid frequency/range (Hz)
Power factor range
BATTERY DATA
Battery type
Normal voltage (V)
Voltage range (V)
Max. charge/discharge current (A)
REGULAR PARAMETERS
Protective class
Ingress protection
Overvoltage category
Inverter topology
Operating temperature range (°C)
Energy storage system label example
Icon
Meaning
Safety warning: electrical hazard
Wait at least 10 minutes after
disconnecting the inverter before
10min
touching internal parts
Product surface may become hot, do not
touch
AEG
Solar Solutions GmbH
+49 69 800 500 810
is a registered trademark
Brückenstrasse 94
info@aeg-industrialsolar.de
used under license
60594 Frankfurt am Main
www.aeg-industrialsolar.de
from AB Electrolux (publ).
Germany
Product assembled in the P.R.C.
3.84
3.07
3600
500
125-425
11
16
1
Single phase (L/N/PE)
)
230
3600
3600
18
18
50
-0.8～+0.8
Single phase (L/N/PE)
)
230
3600
3600
18
50
-0.8～+0.8
Lithium (LFP)
51.2
42~58
50
Class I
IP 20
OVC II(PV) OVCIII(AC)
Non-isolated
-10～+40
10 min
EN
PD202107 V1-21
3
Advertisement
Table of Contents
