Table of Contents
Advertisement
5.3.4 Checking and adjusting system settings in the
Settings menu
The „Settings" menu allows you to
adjust the settings of the AEG energy
storage system.
Selecting the power source; setting the charging /
feed-in intervals and speed
The „Power Sources" sub-menu
allow you to select the power source.
If you wish to only charge the battery
from the PV plant, select
„Power Source: PV system".
If you want the storage system to rely both on the grid
and the PV plant to charge the battery, select „Power
source: PV system and grid power".
If „Power source: PV system" is selected, nothing else
needs to be adjusted. If „Power source: PV system & grid
power" is selected, the „Grid charging settings" and the
„Charging speed settings" have to be adjusted. In the „Grid
charging settings" you can set the intervals at which the
the battery needs to be charged using the grid.
AEG LOW VOLTAGE ENERGY STORAGE UNIT (4 kWH) INSTALLATION MANUAL
will
The speed of charging can also be adjusted. The initial
default charging speed is „Regular/economy mode
(20A)". Low current charging is instrumental to extend
the battery life; „Super charging mode" is only for
occasional use.
Choosing how to use stored energy
If you do not wish that the battery feeds back energy
The „Energy Utilization" sub-menu
will allow you to select the use of the
stored energy.
EN
22
PD202107 V1-21
Advertisement
Table of Contents
