Unpacking The Voluson I / Voluson E Voluson Station - GE Voluson i BT06 Service Manual

GE
D KTI106052, R
IRECTION
3-3-4

Unpacking the Voluson i / Voluson e Voluson Station

1.) Cut the straps securing the shipping carton to the wooden base.
When using sharp tools to open packing materials, take care to avoid cutting or damaging any
CAUTION
of the contents.
!! CAUTION:
2.) Carefully cut the adhesive tape used to close the shipping carton and open the carton.
3.) Remove the packing slip (shipping consignment note) detailing the contents of the shipping carton
and keep close to hand, ready to check whether delivery is complete (according to packing list).
4.) Remove the packing material in front of and surrounding the Voluson Station. Continue to remove
additional packaging material as applicable during the following procedure steps.
5.) Using two people, carefully roll the Voluson Station down the unloading ramp to remove it
completely from the shipping carton.
CAUTION
!! CAUTION:
Make sure the Voluson Station is standing firmly on the floor before applying the locking brake.
6.) Before commencing the installation procedure, check visual damage!
3-8
10
EVISION
Figure 3-7 Shipping carton - Voluson Station
Have two people available to move the Voluson Station
Attempts to move the unit considerable distances or on an incline by one person could
result in injury or damage, or both.
Section 3-3 - Receiving and Unpacking the Equipment
V i / V
OLUSON OLUSON
S M
ERVICE ANUAL
Wooden Base
e