Replacement Of The Lan Connector; Manpower; Tools; Preparations - GE Voluson i BT06 Service Manual

GE
D KTI106052, R
IRECTION
8-20-24

Replacement of the LAN Connector

8-20-24-1

Manpower

One person, 10 minutes
8-20-24-2

Tools

Phillips screwdriver 1
8-20-24-3

Preparations

1.) Power Off/Shutdown the system as described in
2.) Remove the complete lever.
3.) Remove the Top Shelf Bottom Rear Cover as described in
8-20-24-4

LAN Connector - Removal Procedure

1.) Screw off 1 screw, disconnect the cable and carefully remove it.
8-20-24-5

LAN Connector - Installation Procedure

1.) Connect the new LAN Connector and place it on its original position.
2.) Fasten with the screw.
3.) Mount the Top Shelf Bottom Rear Cover as described in
4.) Mount the complete lever at its original position.
10
EVISION
Figure 8-107 screw off the screw
Chapter 8 - Replacement Procedures
Section 3-6-3 on page 3-72.
Section 8-20-13 on page
Section 8-20-13-5 on page
V i / V e
OLUSON OLUSON
S M
ERVICE ANUAL
8-73.
8-73.
8-85