Safety; Limited Warranty; Intrinsic Safety For Hazardous Locations; Label - Honeywell CNI4 Operating And Installation Manual

4 Safety

4 Safety

4.1 Limited Warranty

Mercury Instruments, Inc. warrants all instruments covered by this manual to be free from defects in
material and workmanship under normal use and service of this product. If returned to our factory,
transportation charges prepaid, within 4 years of the original purchase shipment date, Mercury
Instruments agrees to repair or replace any instrument which its examination reveals to have been
defective due to faulty workmanship or material. All obligations or liabilities on Mercury Instruments part
is to repair or replace warranty instruments, and does not include any other type of claims or damages,
including but not limited to consequential damages following the use or misuse of instruments sold by it.
Mercury Instruments reserves the right to, at any time make changes, modification or enhancements to
this product without prior notification. This warranty is in lieu of all other warranties, express or implied.
No agent is authorized to assume for Mercury Instruments any liability except as set forth above.

4.2 Intrinsic Safety for Hazardous Locations

The Mercury Instruments CNI4 is certified by CSA (CUS) for Class I, Div-2, Group D hazardous locations
when installed in accordance with CSA (CUS) control drawing 40-6144 in this manual.
Warning Use only Mercury Instruments manufactured battery packs with part numbers
:
as specified on the certification label or control drawing. Use of third party battery packs
voids product warranty, voids intrinsic safety certifications and may impair safety.
Related Item: Installation Drawing

4.3 Label

Check the following material label and serial number label:
NAME
MODEL NO.
S/N
This device complies with
Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may
not cause harmful interference, and
(2) This device must accept any
interference received,including interference
that may cause undesired operation.
HOneywell
Figure 4-1: Label - Serial Number
CNI4
XXXXXXXX
YYYY/MM
MERCURY
INSTRUMENTS
Country of origin:
Mexico
Honeywell
| 6