Configuring The Cloud Link 4G Modem - Honeywell CNI4 Operating And Installation Manual

7 Getting Started

7.7 Configuring the Cloud Link 4G Modem

To configure the Cloud Link 4G Modem
1. Disconnect the male connector of the USB-to-serial cable that was previously connected to the
Pulse Accumulator.
2. Insert the female connector, so far unused, of the USB-to-serial cable into the male RS232
connector slot on the Cloud Link 4G Modem.
3. Click Connect to connect to the Cloud Link 4G Modem.
4. Close the warning pop-up, enter site name, and click Save.
5. Wait for the dashboard to load. Click the center of the Time Sync widget and perform a time
synchronization between Cloud Link and the PC by clicking Sync.
Honeywell
| 21