Instrument Mounting Options; Wall Mounting - Honeywell CNI4 Operating And Installation Manual

5 Instrument Mounting Options

5 Instrument Mounting Options
A number of options are available for conveniently installing the CNI4 product. These should be clearly
specified at the time of order to ensure that everything the field technician needs is available at the time
of product installation.

5.1 Wall Mounting

Where a flat wall surface is available, such as on the side of a building or shed, stainless steel "hangers"
can be utilized. Illustrated below is the rear view of a CNI4, along with associated mounting dimensions
(in inches).
The lockwasher contacts directly with the enclosure, then the hanger, the flat washer, and lastly the
screw. To secure, tighten the screw until snug, but do not over-tighten.
Recommended wall and fasteners:
Recommended Wall
Fasteners
Figure 5-1: Wall Mounting Tabs and Dimensions
Brick Wall
STAINLESS STEEL THREAD FORMING ¼ dia-1.25" length
Honeywell
| 8