Installing The Sim Card; Connecting Power Supply - Honeywell CNI4 Operating And Installation Manual

7 Getting Started

7.2 Installing the SIM Card

1. Lift the cover on the Cloud Link 4G modem.
2. Slide the white SIM card holder to the right, then lift the left edge.
3. Insert a SIM card into the slot provided and close the card holder.
4. Slide the SIM card holder to the left until it snap locks.
5. Close the cover.

7.3 Connecting power supply

The CNI4 can be powered using battery or external power.
To connect the battery packs to the Cloud Link 4G Modem
1. Install the Cloud Link battery packs with the positive terminal on top.
2. Tie wrap the batteries to the metal plate.
3. Connect the female connector from the first battery to the male connector of the second battery.
4. Remove the warning label as shown in the picture (on next page), and then remove the dummy
battery connector plug on the Cloud Link.
Honeywell
| 15