Makita DHW080 Instruction Manual page 14

26. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to battery pack, picking up or carrying the
appliance. Carrying the appliance with your finger
on the switch or energizing appliance that have
the switch on invites accidents.
27. Disconnect the battery pack from the appli-
ance before making any adjustments, chang-
ing accessories, or storing appliance. Such
preventive safety measures reduce the risk of
starting the appliance accidentally.
28. Do not modify or attempt to repair the appli-
ance or the battery pack except as indicated in
the instructions for use and care.
29. WARNING – Risk of Injection or Injury– Do Not
Direct Discharge Stream At Persons.
Battery tool use and care
1. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
2. Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
3. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
4. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
5. Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behaviour resulting in
fire, explosion or risk of injury.
6. Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 130 °C may cause explosion.
7. Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
Service
1. Follow the maintenance instructions specified
in the manual.
2. To ensure machine safety, use only original
spare parts from the manufacturer or approved
by the manufacturer.
3. Have your high pressure washer serviced by
a qualified repair person using only identi-
cal replacement parts. This will ensure that
the safety of the high pressure washer is
maintained.
4. In case of breakdown or malfunction of the
high pressure washer, immediately switch
it off and remove the battery cartridge(s).
Contact your local dealer or service center.
Additional safety warnings
Comply with the requirements of the local
1.
water supply company.
Do not use the tool when there is a risk of
2.
lightning.
3. When you use the tool on muddy ground, wet
slope, or slippery place, pay attention to your
footing.
4. Avoid working in poor environment where
increased user fatigue is expected.
5. Do not replace the battery in the rain.
Do not submerge the tool into a puddle.
6.
7. Do not leave the tool unattended outdoors in
the rain.
8. When wet leaves or dirt adhere to the suc-
tion mouth (ventilation window) due to rain,
remove them.
9. Do not wash the tool with high pressure water.
10. When washing the tool, do not let water enter
the electrical mechanism such as battery,
motor, and terminals.
When storing the tool, avoid direct sunlight
11.
and rain, and store it in a place where it does
not get hot or humid.
12. Perform inspection or maintenance in a place
where rain can be avoided.
13. After using the tool, remove the adhered dirt
and dry the tool completely before storing.
Depending on the season or the area, there is a
risk of malfunction due to freezing.
14. Do not wet the terminal of battery with liquid
such as water, or submerge the battery. Do not
leave the battery in the rain, nor charge, use,
or store the battery in a damp or wet place. If
the terminal gets wet or liquid enters inside of bat-
tery, the battery may be short circuited and there is
a risk of overheat, fire, or explosion.
15. After removing the battery from the tool or
charger, be sure to attach the battery cover to
the battery and store it in a dry place.
16. Do not replace the battery with wet hands.
Additional safety warnings
1. Comply with the requirements of the local
water supply company.
Do not use a corded power supply such as bat-
2.
tery adapter or portable power pack with this
appliance. The cable of such power supply may
hinder the operation and result in personal injury.
SAVE THESE INSTRUCTIONS.
WARNING:
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
14 ENGLISH
DO NOT let comfort or familiarity