Honeywell Mini-AT User Manual page 9

Connector/Jumper
J2
J3
J4
J5
J6
J7
J8
J9
J10
J20
J21
J22
J23
J26
J27
J28
JB24
Event Log Lock
JB29
and KYb
JB30
JB31
JB32
Pulse Input Circuits
JB900
TB1
Alarm Pulse Output
TB2
Mini-AT User Guide
Purpose
Connection for Field Calibrator
Connection for LCD Display
Connection for KYZ Pulse Channels
Connection for Temperature-1 input
Connection for local Serial Port Connector
Connection #1 for Main Battery
Connection #2 for Main Battery
Connection for UncVol Switch Input
Connection for PCor input
Connection for Aux. Modem
Connection for power to Aux. Modem
Connection for SPI Bus
Connection for BDM Port
Connection for Backup Battery
Connection for Temperature-2 input
Connection for Plog input
Jumpers (5-position) to enable:
Loader/Unconfigure/Flash Upgrade/Serial Access/
Jumpers (2-position) to select pulse width for KYa
Jumper to select Form-A or Form-C
Jumper to select Form-A or Form-C
Jumper to bypass current limit resistor for specific
Jumper to select Modem or Aux. Modem
Surge protected connections for Volume Pulse and
Surge protected connections for Modem and
Alarm Pulse
9
Page 9