Honeywell Mini-AT User Manual page 52

technician to monitor the gas pressure without attaching a portable pressure gauge. Second, the meter technician
can attach a Mercor Mini Field Calibrator to J2 on the main circuit board and perform a single point pressure
or temperature calibration. Hence, the instrument can be calibrated without the need of a laptop computer.
The option selected at Item Code 129 (Live Display Enable) determines which live parameter, if any,
will be displayed after the display of the last Mag List 1 item. The available selections using
MasterLink32) are:
None
Live PCor
Live T
Live PCor & T
Example #2:
Suppose Display Test, Corrected Volume, Uncorrected Volume, Live Gas Pressure and Live Gas Temperature
are the only items desired for the meter reader list. Since items 008 and 026 do not provide a live reading, it
is necessary to configure Item Code 129 as shown below:
Note: Remember, all Mag List 1 & 2 items have a 1-minute time-out and both live parameters have a 10-minute
time-out.
Item Item Legend
Code#
075 Mag List 2 Item 1 #
129 Live Display Enable
130 Mag List 1 Item 1 #
131 Mag List 1 Item 2 #
132 Mag List 1 Item 3 #
133 Mag List 1 Item 4 #
134 Mag List 1 Item 5 #
135 Mag List 1 Item 6 #
www.honeywell.com
52
Mini-AT User Guide
Live PLog
Live PCor & PLog
Live PLog & T
Live PCor, T & PLog
Selected Description
Item
255 (End-Of-List)
Live PCor&T Live PCor Pressure & Temperature
061 Display Test
000 Corrected Volume
002 Uncorrected Volume
255 (End-Of-List)
255 (End-Of-List)
255 (End-Of-List)
Mini-AT Link (or