Cisco TelePresence SX10 Quick Set Administrator's Manual page 14

Cisco TelePresence SX10 Quick Set Administrator Guide

Introduction Introduction Configuration Peripherals Maintenance System settings Appendices
Automatic factory reset when changing the call
service - device activation
(All products)
The video system will automatically factory reset and
restart when using the user interface to change the
device activation method, for example from VCS to Cisco
UCM. This will prevent conflicting configurations when
provisioning the video system to a new service.
Changing the provisioning from the API will not
automatically factory reset the video system.
Support for separate RTP port ranges for audio
and other media
(All products)
You can configure the video system so that audio uses
a different RTP port range than other media. The two
ranges cannot overlap. As default, all media use the same
RTP port range.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019. www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
14