Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
SNMP
On the Advanced / SNMP page, you can enable and configure the SNMP agent of the access
point.
The SNMP agent is a service which sends data on the state and settings of the device where is it
enabled to the SNMP manager (the network management system of your ISP or system
administrator).
In order to enable the SNMP agent, in the Configuration section, move the Enable SNMP
switch to the right. Then specify the needed parameters.
Parameter
Remote subnet
Hostname
Figure 96. The Advanced / SNMP page.
Configuration
The IP address of the remote subnet where the SNMP manager is
located.
A name of the access point for identification in the SNMP manager.
Page 114 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
