Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Remote Access
This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / Remote Access page, you can configure access to the web-based interface
of the access point. By default, the access from external networks to the access point is closed. If
you need to allow access to the access point from the external network, create relevant rules.
To create a new rule, click the ADD button (
Figure 113. The window for adding a rule for remote management.
Figure 112. The Advanced / Remote Access page.
Page 134 of 175
).
Configuring via Web-based Interface
Advertisement
Table of Contents
