DAP-300P Wireless N300 PoE Access Point / Router
User Manual
DDNS
This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / DDNS page, you can configure the router to use a DDNS service.
A DDNS service allows associating a domain name with dynamic IP addresses. In order to use a
service, it is necessary to register a domain name on the web site of your DDNS provider.
To add a new DDNS service, click the ADD button.
Figure 107. The page for configuring the router to use a DDNS service.
Figure 106. The Advanced / DDNS page.
Page 127 of 175
Configuring via Web-based Interface